|
|
|
|
  |
|
Miller Relief Step Safety Device
The Relief Step Safety Device
alleviates the effects of orthostatic intolerance, also known as
suspension trauma. If a fall occurs, a person becomes suspended
in a harness and remains both vertical and sedentary for a
period of time, causing blood to pool in the veins of the
legs. Subsequently, blood is restricted to the brain and other
major organs that may initially result in unconsciousness. If
not rescued promptly, serious injury or death may occur. The
Relief Step is designed to provide a short-term solution for
alleviating suspension trauma. |
|
|
|
- OSHA states that potentially fatal suspension trauma can occur
within minutes while waiting for rescue after a fall.
- Average fall rescue time is 15 minutes.
- When used, the Relief Step Safety Device provides support and
enhances blood circulation until rescue permitting the ability
to move and flex leg muscles.
- Small and lightweight; the Relief Step Safety Device
attaches to
any brand full-body harness.
- Utilizing two (2) Relief Steps (one for each leg/foot) assures
greater comfort until rescue is completed.
- Sold in 5 packs.
|
|
|
|
|
|
|
|
|
 |
|
Guardian Trauma Strap
- Helps to mitigate the effects of suspension trauma (which
can occur in as little as 15 minutes).
- Allows the fallen worker to assume a standing position and relieve pressure on the lower extremities.
- Allows better blood flow and reduces fatigue.
- Easy to adjust, and its low profile keeps it out of the way during work.
- Sold in 3 packs.
|
|
 |
|
Guardian Bucket of Safe-Tie
- Specialty kit built for the roofer, by the roofer.
- Velocity fall harness, Size M-L.
- Integrated shock absorber into lifeline.
- One reusable temper anchor.
- 50 ft. vertical life line.
- 5 gallon bucket w/lid.
|
|
|
|
|
|
  |
|
Guardian Ridge-It Roof Anchors
- Easy to install Ridge-It Anchor lines are designed for use on wood rooftops.
- One D-Ring model is 9-3/4 inch long.
- Double D-Ring model is 18 inch long.
- Worker capacity up to 420 lbs for both models.
- Min. breaking strength is 5,000 lbs.
- OSHA 1910 and OSHA 1926 Subpart M.
- Sold in 3 packs.
|
|
|
|
|
3M Roof Anchor
|
|
Guardian Temper Roof Anchor |
- D-ring anchorage plate with zinc plated steel D-ring and 304 stainless steel plate.
- Extremely rugged and corrosion resistant.
- Bolt or weld to structure for fall arrest anchor point.
- Compact 6.35 x 50 x 115 mm 304 stainless steel plate.
- Pre-drilled 14 mm holes.
- Sold in 3-packs.
|
|
- Zinc plated steel.
- Designed for use on wood, steel, and concrete substrates.
- Fits all roof pitches from flat to sheer.
- Offset holes down the center help keep the truss from
splitting.
- Sold in 6 packs.
|
|
|
|
|
|
|
|
|
|
 |
|
Guardian Shingle Remover
- Classic Shingle Remover possesses an ergonomic design with vinyl grip handles, rugged steel construction, and a hot tempered work edge.
- Lightweight and versatile.
- This particular model of shingle remover is a general purpose shingle remover that pulls up to 16D nails with a
54 inch long steel handle and ten teeth.
|
|
|
|
|
 |
|
Guardian SAFE-T Ladder Extension
- Safe-T Ladder Extension System is designed to attach to the top of
virtually any ladder to provide a safe and easy transition from the ladder to a raised surface.
- Requires no tools, drilling, or bolting to install.
- Provides 2 offsetting handrails that offer a point of walkthrough to step on or off the ladder.
- Patented piece of equipment assists workers in complying with OSHA standard 1926.1053(b).
- Specially designed with cushioned bumper pads to help protect the eave of the roof, and its handgrips help ensure maximum safety.
|
|
|
|
|
|
 |
|
3M Battery Tool Holster
- Allows cordless drills and similar battery operated devices to be safely tethered when used at height.
- Battery holster provides attachment point for tool tether.
- Neoprene sleeve with an adjustable strap conforms to the shape and size of virtually any
yool battery
- Sleeve is simply cinched to the tool.
- 10 lb. (4.5 kg) capacity.
- Sold in 3 packs.
|
|
|
|
|
3M Small Parts Pouch
- Neoprene pocket with retractor, 52 in. length, with 1.5 lb. capacity.
- Bottom drain vent.
- High visibility reflectors and water drainage vent.
- 1 inch D-rings are built into both sides of the holster and are load rated for 5 lbs.
- Magnetic tool staging system holds tools in place.
- Meets ANSI / ISEA 121-2018.
- Sold in 3 packs.
|
|
3M Single Tool Holster
- Patented small parts pouch is ideal for nuts, bolts, screws, nails and can be used from a belt or harness.
- Guards against accidental drops the moment something is
put inside.
- Innovative self-closure system traps objects inside, making it nearly impossible for them to fall out.
- Still makes it easy for retrieval by the user since no opening or closing is necessary.
- Made from 18 oz. duck canvas.
- Meets ANSI / ISEA 121-2018.
|
|
|
|
|
|
|
|
|
Ergodyne Tool Tether Kit
 |
|
Ergodyne Wrist Tether Kit
 |
- Tether up to three 10lb tools.
- 3 Elastic Loop Tool Tails.
- Self-Adhering Tape Trap - 12 ft roll.
- Tool Loop Lanyard, Single Carabiner - 10lbs.
- Manual locking screwgate carabiner.
- ANSI/ISEA 121-2018.
- Sold in 3 packs.
|
|
- Tether up to four 3lb tools.
- Pull-On Wrist Lanyard with Buckle.
- Self-Adhering Tape Trap - 12 ft roll.
- Detachable Loops, 3-Pack.
|
|
|
|
|
|
|
|
|
|
|
719-761-5814
|
|
Top of Page
|
