DBI/Sala & Protecta Fall Protection Harnesses & More

Protecta FIRST Vest Style Harness

Protecta Construction Harness

• Features 5-point adjustment, back and side D-rings and tongue-buckle leg straps.
• Corrosion-resistant hardware is made of zinc-plated
  stamped steel.
• Wide 1 3/4" polyester web with supple back plaque.
• Minimum tensile strength greater than 5,000 lbs.
• Universal size.
• Meets or exceeds OSHA 1926 regulations, ANSI Z359.1 and CSA standards.

• This P200 Safety Harness feature padding to help keep workers comfortable in even the harshest environments.
• Polyester web construction offers superior abrasion resistance and durability, with comfort padding  make this harness lightweight and comfortable for longer wear.
• Tongue-buckle body belt with hip pads and side D-rings for positioning and back D-Ring.
• Tongue-buckle leg straps for fast and easy donning.
• Features a web pSRL adapter for attachment of personal self-retracting lifelines (pSRLs).
• Built-in lanyard keepers hold lanyard close to body.
• Designed for individuals with combined equipment up to 420 lbs.
• Meets ANSI Z359.11, OSHA 1926.502 standards.
• MFR Part No's:  1161309 & 1161310.

DBI/Sala Delta II Vest Style Harness w/Single D-Ring

DBI/Sala Delta II Cross-Over Harness

• Lightweight polyester webbing construction adds durability.
• The Delta No-Tangle� design provides comfort and easy donning.
• Features spring-loaded, stand-up back D-ring, adjustable non-slip chest strap with pass-through
  buckle and parachute-buckles on lower shoulder straps.
• Plated hardware for corrosion resistance.
• Universal size.
• I-Safe� enabled with RFID technology.
• 420 lbs. capacity.
• Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359.

• Harness is constructed from yellow polyester offering good resistance to sunlight and chemicals.
• Cross-over design provides added comfort and versatility with adjustable front D-ring and pass-through buckle legs.
• The Delta No-Tangle� feature increases user
  acceptance by eliminating tangling, and the design provides extra comfort throughout the neck, shoulders and back areas.
• Spring-loaded stand-up back D-ring and side D-rings ensure fast, easy, and safe connections.
• Plated hardware for corrosion resistance.
•  420 lbs. capacity.
• I-Safe� enabled with RFID technology.
•  Universal size.
• Meets or exceeds applicable industry standards
  including OSHA, ANSI Z359 and CSA.

DBI/Sala Delta II Construction Harness

DBI/Sala ExoFit XP Construction Harness

• Constructed from highly durable polyester webbing that offers good resistance to sunlight and chemicals.
• The Delta No-Tangle� feature increases user acceptance by eliminating all tangling, and innovative design provides extra comfort throughout the neck, shoulders and back areas.
• Features include a standup back D-ring, side D-rings, body belt and tongue-buckle leg straps.
• I-Safe� RFID enabled.
• 420 lb. weight capacity.
• Meets all applicable OSHA requirements, ANSI standards and CSA certifications.

• Constructed with removable padding, 3-D mesh lining that wicks moisture away.
• �X� design padding that wraps around the wearer for no-tangle donning.
• Features spring-loaded �stand-up� dorsal D-ring, side D-rings, quick-connect buckle leg and chest straps, sewn-in back pad and belt.
• Torso buckles hold the straps firmly in place and complete the 5-point adjustment system.
• Polyester webbing is strong without feeling stiff and makes a truly washable harness.
• Ergonomic design incorporating shoulder, hip and leg padding and soft edging.
• Built-in belt loops.
• Coated hardware for corrosion resistance.
• I-Safe� enabled with RFID technology
• 420 lb. capacity.
• Meets or exceeds all applicable industry standards including OSHA and ANSI including the stringent ANSI Z359.

DBI/Sala Rope Grab

DBI/Sala EZ-Line Retractable Horizontal Lifeline System

• Mobile design with hands-free operation automatically follows the user.
• Designed to be less sensitive to 5/8" rope variations.
• Use with 3' shock-absorbing lanyard.
• Meets or exceeds all applicable OSHA requirements and ANSI standards including ANSI Z359.

• Innovative retractable design allows the user to quickly and efficiently set-up any length of system and dismantle it just as fast.
• Retractable lifeline is simply pulled out for installation and retracted with the built-in winch for dismantle.
•  Entire system is retracted into an easy to carry case which eliminates large, bulky coils of cable.
• Weighs 25 lbs.
• Built-in pre-tension and impact indicators take the guess work out of set-up and inspection.
• Provides hands-free horizontal mobility and continuous protection for 2 users per span, up to 6 users per system.

Protecta Reusable Roof Anchor

Protecta Compliance in a Can

• Zinc-coated steel construction with forged alloy D-ring and includes (20) 16D nails for single use.
•  Anchorage point is 5,000 lb. rated.
• Total weight is 3 lbs.

• DISCONTINUED - ITEMS SOLD SEPARATELY:
• Protecta FIRST 5-point harness - p/n AB17530
• Reusable roof anchor bracket - p/n 2104000
• 5/8" rope grab with 2' shock absorber - p/n 1340005
• 50' of 5/8" blended rope lifeline with attached snap hook - p/n 129997
• Meets all OSHA and ANSI applicable standards.

DBI/Sala Concrete D-Ring Anchor

DBI/Sala Fixed Beam Anchor

• A simple, versatile and safe concrete anchor solution.
• Reusable D-ring assembly, just install a new bolt
  and it�s ready for use again.
• Rugged design for harsh environments with no moving or fragile parts.
• Safe �hook-up� indicator notifies the user that the anchor has been installed properly.
• Installs with standard drill bits, 11/16", 18 mm or 3/4".
• Rated 5,000 lbs.
• Connection point swivels 360� for safety and ease-of-use.
• Meets or exceeds all applicable industry standards including OSHA, ANSI and ASTM E488 Standard Test Methods for Strength of Anchors.

• Specifically designed for a fall arrest anchorage and can also be used as an end point for some horizontal lifeline systems.
• Installs quickly to the beam structure, with final tightening using a built-in adjustment handle.
• Attach it to the beam structure in any orientation or
  direction for added versatility.
• Available to fit flanges up to 1-1/2" thick and up to 12" wide.
• Rated 5,000 lbs. minimum strength in any direction.
• Meets or exceeds all applicable OSHA requirements and ANSI standards including ANSI Z359.

DBI/Sala Glyder 2 Sliding Beam Anchor

• Sliding beam anchor systems provide complete horizontal mobility and can be tied-off overhead or at feet.
• The anchor effortlessly slides across the beam on its wear pads, eliminating metal-to-metal contact.
• Channel lock prevents beam grip ends from rotating for hassle-free connection.
• Positive spring-loaded engagement provides precision adjustment.
• Dual beam grip adjustment prevents twisting and turning as it moves along the beam.
• Replaceable wear pads.
• SMALL fits 3-1/2" to 14" wide beams.
• LARGE fits 12" to 30" wide beams.
• Meets or exceeds all applicable industry standards
  including OSHA 1910.140, OSHA 1926.502.

Top of Page