Dupont Tychem Level A HazMat Protective Suits

DuPont Tychem 2000 Tape

• Flexible seal with trusted protection equivalent to Tychem� 2000 fabric.
• Helps to hold protective apparel ensemble items in place (e.g., to hold a sleeve over a glove, a pant leg over a boot, or to keep a closure flap closed)
• Provides protection against a variety of inorganic acids and bases, as well as common industrial cleaning agents like bleach.
• Note: Taping does not provide reliable gas-tight barrier performance.
• Size: Width ~2 inches x Length 60 yards.
• Sold 12 rolls per case.

DuPont Tychem TK Level A HazMat Suits - TK554T/TK555T

• Tychem 10000 fabric.
• High-level protection against toxic and corrosive gases, liquids and solid chemicals.
• Suited for HazMat and domestic preparedness situations.
• Extremely durable, puncture- and tear-resistant fabrics.
• Successfully tested against more than 327 chemicals.
• Totally encapsulated, vapor protective Level A.
• Tychem TK is high-visibility lime yellow.
• These are NOT flame resistent! Download above PDF catalog for other flame resistent Level A suits.
• Five year shelf life.
• MFR Part No's TK550T & TK551T have been discontinued.
• Starting at just $1,029.

• TK554T Butyl Outer Gloves, Front Entry 1/Case.
• TK555T Butyl Outer Gloves, Rear Entry 1/Case.
• Double taped seams.
• EX (EXTRA WIDE) 3-layer faceshield (PVC 40 mil / Teflon 5 mill / PVC 20 mil).
• Gas-Tight PVC zipper closure.
• Double storm flaps with hook-and-loop closure.
• Two exhaust valves.
• Expanded back.
• Internal adjustment belt.
• Attached internal barrier gloves (cotton blend).
• Optional Viton outer gloves  (MFR p/n ends in 5C)
• Knee wear pads.
• Attached socks.
• Outer boot flaps.
• Larger sizes available.
• Complete MFR Part No:  TK554TLY-Size-000100  (Front Entry).
• Complete MFR Part No:  TK555TLY-Size-000100  (Rear Entry).

DuPont� Tychem� TK Level A HazMat Suits - TK612T/TK613T

• Certified to meet NFPA 1994 Class 2 standards (Standard on Protective Ensembles for First Responders to CBRN Terrorism Incidents).  See TK User Manual for more information.
• Tychem� 10000 exhibits excellent chemical barrier properties and offers an extremely durable fabric that is puncture- and tear-resistant.
• Tychem� 10000 fabric shows at least 30 minutes of barrier protection to 322 challenge chemicals with no observed breakthrough.
• Tychem� 10000 is specifically developed for protection against toxic, corrosive gases, liquids and solid chemicals.
• This high-performance chemical barrier fabric is suited for industrial, HazMat, and domestic preparedness applications.
• Complete MFR Part No:  TK612TLY-Size-000100 (Front Entry).
• Complete MFR Part No:  TK613TLY-Size-000100 (Rear Entry).

• Encapsulated Level A garment design is our highest level of protection from liquid splash and vapor/gas exposures for both the wearer and respiratory equipment.
• Double taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered, both inside and outside of garment with compatible chemical-resistant material by heat-sealing.
• Expanded EX faceshield provides wide 220 degree viewing angle.
• Vapor tight, extra long zipper.
• Expanded back to accommodate SCBA.
• Attached internal gloves composed of five layer laminate film for a broad range of chemical protection.
• Integrated socks composed of garment material.
• Two exhaust valves release higher pressure inside encapsulating garments while simultaneously helping to prevent inward leakage of external vapors or particles into the garment.
• One-way valves are positive pressure and open on demand. Valves include splash covers made of barrier material to help prevent liquid intrusion. Valves are located on left back of head and right lower back.
• Each suit has a unique serial number and is fully tested at time of manufacture including positive air pressure integrity testing per ASTM F1052.

DuPont Personal Protection
Pressure Test Kit

Kit Contents:

• Self-contained blower unit.
• Pressure gauge (Magnehelic) calibrated to 8 inch water gauge pressure. 
• Timer.
• Four metal bayonet-style connectors: two marked with the letter �A� for Auer, and two marked with the letter �P� for Pirelli.
• Two black rubber caps.
• A large diameter corrugated hose.
• A small diameter, clear plastic hose.
• Power cord.
• Does not require an external air supply.
• Full MFR P/N:  99081000000001UV

DuPont� Replacement Auer Exhaust Valve Diaphragms - 4 Pack

DuPont� Replacement Pirelli Exhaust Valve Diaphragms - 2 Pack

• Currently made by MSA for DuPont.
• Packaging may reflect MSA logo.

• Currently made by MSA for DuPont.
• Packaging may reflect MSA logo.

Top of Page