MSA Head & Face Protection

MSA V-Gard Hard Caps

MSA V-Gard� Standard Hard Cap,
Slotted

• Consist of a polyethylene shell and suspension working together as a protection system.
• Slotted for the attachment of certain accessories.
• The hat is 6-1/2 to 8 inches, available in three cap sizes:
• Small (6 to 7-1/8 inches)
• Standard/Medium (6-1/2 to 8 inches)
• Large (7-1/2 to 8-1/2 inches)
• Meets or exceeds the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1-2003, Class E (electrical-high voltage) and G (electrical-low voltage).
• MFR Part No's for Fas-Trac Suspension:  475358, 475359, 475360, 475362, 475363, 488146, 815565.
• MFR Part No's for Staz-On Suspension:  463942, 463943, 463944, 463946, 463947, 815558.

MSA V-Gard� Full Brim Hard Hat,
Non-Slotted

• Utilizes a full brim to provide optimum coverage and protection.
• Includes a Cushionaire� sweatband and adjustable crown straps.
• Non-Slotted.
• Available with Fas-Trac or Staz-On suspension.
• Meets ANSI Z89.1-2003, Type 1, Class E standards.
• MFR Part No's for Fas-Trac suspension:  475369, 475368, 475366, 475370, 475371, 10021292, 815570.
• MFR Part No's for Staz-On suspension:  454733, 454732, 454730, 454735, 454736, 489360, 815562.

MSA Topgard� Protective Caps & Hats

• MFR Part No's for Fas-Trac Suspension Slotted Cap: 475385, 475378, 475380 & 475384.
• MFR Part No's for Fas-Trac Suspension, Full Brim Hat: 475393, 475387, 804397

• Lightweight, durable Topgard slotted caps and non-slotted hats are built for use by utilities and other industries where head protection from falling objects is necessary along with good dielectric properties (non-conduction of electrical current).
• Limited resistance to top impact or penetration is retained through a wide range of temperatures.
• Not designed to protect against lateral blows from the front, side or rear. (MSA's Vanguard Type II protective helmets must be used if lateral protection is desired.)
• SEI Certified and meets or exceeds the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1-2003, Class E (electrical-high voltage) and G (electrical-low voltage).

MSA Skullgard Protective Headwear

• Heavy duty construction for use in steel mills and other industries where elevated temperatures are common.
• Available in variety of colors.  (Natural color shown)
• Meets ANSI Z89.1-2003, Type I, Class G.
• MFR Part No's, Cap, Staz-On:  454617, 454618, 454619, 454620, 454621, 454622, 454623, 454626.
• MFR Part No's, Cap, Fas-Trac:  475395, 475396, 475397.
• MFR Part No's, Hat, Staz-On:  454664, 454665, 454666, 454668, 454673.
• MFR Part No's, Hat, Fas-Trac:  475407, 475408.
• Starting as low as $92.

MSA Comfo� Cap & Accessories

• Widely used in the mining industry for head protection.
• The cap has a low-crown clearance for work in low-ceiling areas.
• Equipped with a lamp bracket and cordholder to support a miner's lamp.
• MFR Part No's:  91522, 91585, 91586, 91584, 91590, 91589, 82769.
• Starting at just $54.

MSA Bump Caps

• Perforated side for cross ventilation & air circulation.
• Adjustable sizing 6-1/2 to 8.
• No replacement parts.
• Faceshield Frame and Visor available.
• Use for situations which do NOT require ANSI-compliant head protection.
• Sold in 10 packs.
• MFR Part No's:  10033650, 10033651, 10033652, 10033653, 10033654 & 10033655.

MSA Hard Hat Accessories

Sun Shields for Hard Hats

• Extends the brim all the way around the head to help protect the wearer's ears and neck from the sun's rays.
• Made of polyurethane, the front portion is a smoke-tinted Lexan material.
• Sold in 3 packs.

Terri-Band Sweatbands

• Custom designed sweatband fits all MSA helmets.
• Sweatband is washable and features plastic snaps.
• Sold in 10 packs.

MSA V-Gard Frame for Slotted Caps w/Debris Control

MSA V-Gard General Purpose Visor, Standard Length

• Stowable slot adapters allow frames to work with or without earmuffs.
• Replaceable debris-control creates a tight seal between helmet and the frame.
• Sliding adjustment blades allow visor to work with most half-mask respirators.
• Unique V-shaped channels for easy run-off.
• Fits all slotted MSA caps.
• Sold in 3 packs.

• Made of durable polycarbonate.
• Helps protect wearers from flying debris, splash or spray.
• For general purpose and can be worn with cap-mounted earmuffs.
• Wider design for improved resistance to impact and splash hazards.
• Maximum UV protection.
• 8 inch x 17 inch x .04 inch.
• Meets requirements for EN 166 (2C-1.2 MSA 1B89), ANSI/ISEA Z87.1-2010, and AS/NZS 1337.
• Sold in 10 packs.

MSA V-Gard Frame for Full-Brim Hard Hats

MSA V-Gard Propianate Visor for Chemical

• Design allows use with other personal protective equipment, such as earmuffs and most half-mask respirators.
• Heavy-duty rubber strap prevents frame from slipping off of hats.
• Unique V-shaped channels.
• Fits all MSA full-brim hats.
• Sold in 3 packs.

• V-Gard Propionate Visors provide impact protection, and are good for those applications where chemical splash hazards also exist.
• They offer increased impact protection and superior optical quality over acetate visors.
• 9.2 inch x 18 inch x .098 inch.
• Meets requirements for ANSI Z87.1-2010 - IAC-03-002-CAL_r4. and CSA Z94.3-2007
• Sold in 10 packs.

MSA NFL V-Gard�  Helmets

• Officially licensed NFL V-Gard� helmets
• All NFL teams available. Allow a choice of NFL team colors for use at work, at home or even at the game.
• Feature comfortable strap-adjustable, Staz-On� suspension and offers superior quality, comfort and protection.
• Safety directors will appreciate how NFL V-Gard caps complement a safety program. With workers more inclined to wear them, this line of MSA hardhats can improve wearer acceptance.

Top of Page