Ansell Specialty Glove Protection

Ansell SensiLite� 48-101 Gloves

• Polyurethane palm coating with elastic nylon liner.
• Offers secure grip with dexterity.
• EN level 4 abrasion resistance.
• EN level 1 cut resistance.
• Ideal for assembly of small parts.
• Can be worn comfortably all day.

Ansell PowerFlex� 80-100 Gloves

Ansell PowerFlex� Plus 80-600 Gloves

• Cut-, Abrasion-, and Puncture-Resistant; Poly/Cotton Knit Liner.
• PowerFlex gloves provide a combination of cut, abrasion, and puncture resistance; superior wet and dry grip; and unbelievable comfort.
• The gloves are ergonomically designed with a soft gray, seamless poly/cotton knit liner that�s palm-dipped with a textured, natural rubber coating.
• The uncoated back allows air to circulate which keeps hands cooler and drier, and the fully coated thumb provides added protection in this high-risk area.
• Sold per dozen.

• Cut-, Abrasion-, and Puncture-Resistant; 100% DuPont� Kevlar� Liner.
• Power Flex Plus provides cut, abrasion, and puncture resistance; superior wet and dry grip; and unbelievable comfort.
• The gloves are ergonomically designed and feature a seamless Kevlar� knit lining that�s palm-dipped with a textured, natural rubber coating.
• The uncoated back allows air to circulate which keeps hands cooler and drier, and the fully coated thumb provides added protection in this high-risk area.
• Sold per dozen.

Ansell PowerFlex� T� Hi Viz Yellow� (80-400)

• Ideal for any cold environment.
• This version of the PowerFlex glove offers a hi viz (high visibility) yellow thermal terry liner with a natural rubber coating for added grip.
• Thanks to the gloves� optimal warmth, flexibility and grip, you can accomplish any task from handling cold objects to working in conditions where temperatures can drop as low as -25C (-13F).
• Just $6.8 ea.
• Sold per dozen.

Ansell Neox� Gloves

• The neoprene coating on Neox gloves provides better all-around resistance to cuts, abrasions, and chemicals than most other glove coatings.
• The interlock knit cotton lining enhances puncture and snag resistance.
• Curved fingers and a wing thumb provide a natural fit and greater comfort, and the two-piece lining eliminates irritating seams.
• Universal size 10 (large).
• MFR Part No's:  9-924 & 9-928.
• Sold per dozen.

Ansell AlphaTEC� Gloves

• Ansell AlphaTEC gloves feature the revolutionary Ansell Grip Technology.
• Patent-pending nitrile layer is filled with microscopic channels that actively repel oils and lubricants, providing the same grip you would have in fluid-free conditions.
• 13-mil w/12 or 14 inch gauntlet cuff.
• Black/burgundy.
• MFR Part No. 58-530 and 58-535

Ansell Scorpio� Gloves

• Scorpio gloves offer broad-spectrum resistance to a wide range of chemicals, including oils, acids, solvents, and caustics.
• Interlock knit cotton lining and flexible neoprene coating stretch to provide a snug fit, and allow easy on and off.
• The two-piece lining eliminates seams which can cause hand irritation and premature wear-through.
• A dipped rough finish makes handling wet, slippery materials easier and safer.
• Available with 12 or 14 inch gauntlet cuff.
• MFR Part No's:  8-352 & 8-354.
• Sold per dozen.

Ansell AlphaTec PVC Gloves

• Previously known as Snorkel 04-644.
• A comfort PVC glove providing good dexterity and pliability even at low temperature.
• Unique rough finish with superb wet-grip performance.
• 13 gauge knitted cotton liner.
• Good cut and abrasion performance.
• 12inch (300mm) glove length.
• MFR Part No. 04-644.
• Sold per dozen pair.

Ansell Redmont Gloves

• Neoprene-Coated, Heavy-Duty Redmont gloves.
• Premium quality, designed to wear up to 30% longer than ordinary neoprene-coated gloves.
• Feature a dipped rough finish for easier and safer handling of wet surfaces, as well as maximum protection when handling oils, acids, caustics, alcohols, and many solvents.
• Tthe fabric lining improves snag and puncture resistance.
• MFR Part No. 19-938.
• Sold per dozen pair.

Ansell ActivArmr Gloves

• Previously known as NitraSafe.
• Premium-Quality; Snag-, Puncture-, Abrasion-, and Cut-Resistance.
• In sharp, oily, puncturing, and abrasive environments, NitraSafe� gloves outperform leather and cut-resistant automatic knit liners.
• Uunique combination of nitrile coating and Kevlar� fibers enables the gloves to resist cuts nine times better than leather-palm designs, with twice the puncture resistance and over 20 times the abrasion resistance.
•  NitraSafe� gloves offer more than eight times the cut resistance of heavy-duty nitrile-coated gloves, and they have superior dry grip capabilities.
•  Ergonomically designed, the gloves have a five-piece jersey lining for increased flexibility and worker comfort.
• MFR Part No's  28-346 & 28-349 discontinued.
• Sold per dozen.

Ansell Metalist�  Foam Cut-Resistant Gloves with Kevlar� Panels (28-507)

• Manufactured with a patented porous nitrile foam coating that stands up to cuts.
• Underneath, a two-face liner features cut-resistant Kevlar� panels in high-stress areas.
• Provides excellent grip on oily surfaces by channeling oil away from the surface of the glove.
• A nitrile safety cuff is included for added wrist and forearm protection.
• Sold per dozen.

Ansell PVA (Polyvinyl Alcohol-Coated) Gloves (15-554)

• PVA gloves are nearly inert to strong solvents, including aromatics, aliphatics, and chlorinated solvents�chemicals which quickly deteriorate natural rubber, neoprene, and PVC gloves.
• With PVA gloves, there is little absorption to cause swelling, and little extraction to cause shrinking.
• PVA gloves only weigh about half as much as neoprene-coated gauntlets, so they provide a high level of comfort.
• PVA also offers good resistance to snags, punctures, abrasion, and cuts.
• Fully coated & interlock knit-lined.
• Sold per dozen.

Top of Page